The difference between woodworking multi-blade saws

The commonly used production machines in panel furniture factories are basically the same, such as sanding machines, sliding table saws, engraving machines, edge banding machines, cold presses, hot presses, multi-blade saws, etc.


MJ143A.jpg


There are also many types of multi-blade saws, such as log multi-blade saws, square wood multiple-blade saws, and upper and lower multiple-blade saws, which are also divided into crawler type, belt type, and shaft type. Today we will pick several common multi-blade saws to talk about their advantages, and provide reference for everyone to buy multi-blade saws.


MJ143A (7).jpg


Log multi-blade saw:

Log multi-blade saw is to saw the log into plates. Use a slim, small-gauge woodworking saw blade for light loads and material savings.


The feeding system is mostly left, right, up and down car drive shafts, which rotate synchronously, also called a coupling, with a large feeding force, and it is not easy to get stuck in the wood, and the log is not easy to deviate when fed with its coupling.


Because log multi-blade saw are mostly controlled by couplings, it can prevent track wear, rust, belt aging and scratches, excellent moisture-proof design, so that the main shaft bearings are better moisture-proof when working, and reduce saw blade burning. possible. Most of the spindles of log multi-blade saw are relatively thick, and have been professionally inspected by dynamic balancing machines, with smaller vibration and sound rays.


MJ143A (9).jpg

Square wood multi blade saw:

Square wood multi-blade saws are mostly crawler-type, and the feeding device uses crawler belts similar to tanks for transmission. With pressure shoes and pressure wheels, it can better increase the conveying device to grab materials and move forward.


When the track is sawing and sawing the square wood, the feeding facility will not swing from side to side, resulting in uneven sawing.


MJ143A (8).jpg


There are many types of woodworking saw blades that can be used in square wood multi-blade saws, such as many commonly used woodworking saw blades such as upper and lower teeth, flat teeth, ladder flat teeth, inverted trapezoidal teeth, and dovetail teeth.


Different types of woodworking saw blades have different main purposes, and a suitable woodworking saw blade must be selected according to the material to be cut and the cutting shape. There are many types of woodworking saw blades. The basic parameters are tooth shape, number of teeth, angle, thickness, and diameter of woodworking saw blades. These are important parameters to measure the performance, production capacity and sawing capacity of saw blades.

Related recommendations

Best quality, best service