Multi-blade sawing machine is mainly used for longitudinal sawing of plates and square materials. It is fed by the crawler. The processed plates and square materials can get several slats through the machine tool at a time, with high productivity. It is often used in furniture workshops and blockboards. Workshop and floor production workshop. ZICAR’S multi-blade saw is mainly composed of a bed, a worktable, a feed track, a circular saw blade and a workpiece pressing device. When the multi-blade circular saw machine processes plates and square materials, the position of the saw blade and the height of the pressing device are adjusted according to the thickness of the plate and square material, and the number of installed saw blades is determined according to the power of the main motor.

——

The multi-blade saw is directly below the saw blade. Generally, the crawler will be recessed for a certain distance to ensure that the saw blade can completely saw the entire thickness of the wood during sawing, and the saw blade does not touch the crawler. The feeding and discharging pressure rollers and the feeding and discharging devices of the double-shaft multi-blade circular saw machine can make the processed wood feed continuously with variable speed; the main motors of the upper and lower saw shafts respectively drive the upper and lower saw shafts to rotate , and then drive the circular saw blade to rotate to realize the sawing of the processed wood.

——

The installation position, usually the upper saw shaft is slightly close to the feed end, and the lower saw shaft is slightly close to the discharge end. The upper and lower saw shafts usually rotate in opposite directions. The cutting direction of the upper saw blade is the same as the feeding direction, and the lower saw blade is opposite to the feeding direction. The purpose is to make the cutting force of the upper and lower sets of saw blades on wood basically Balanced, in order to facilitate the improvement of sawing quality. The feeding and discharging pressure rollers and the feeding and discharging devices of the double-shaft multi-blade circular saw can make the processed wood feed continuously at a variable speed; the main motors of the upper and lower saw shafts drive the upper and lower saw shafts respectively It rotates, and then drives the circular saw blade to rotate to realize the sawing of the processed wood.