Related Questions about Multi-blade rip saw machine

1: What is the difference between multi-blade saw and single-blade saw?

Multi-blade saws are machined after the combination of multiple saw blades, while single-blade saws are single-blade operations. Generally, the requirements of saw blades for a single operation are not very high, even if the quality is slightly inferior, it does not matter much; while multi-blade saws do not. In the same way, the requirements for saw blades are relatively high, but when using multi-blade saws, it is generally required to save wood, the sawing road is small, the saw blade is thin, and the finish is high.

2: Why do some multi-blade saw blades have holes? What does it do?

Generally, it is divided into heat dissipation holes and noise reduction holes. Heat dissipation holes - the saw blade is easily deformed due to heat due to the working of the saw blade under high speed conditions; Noise reduction holes - reduce the noise generated by the saw blade during work.

3: What is the main reason for the multi-blade saw blade burning?

1. The overall heat dissipation of the saw blade is not good.

2. Too many teeth on the saw blade. The more teeth, the greater the resistance, and it is easy to burn the saw blade.

3. The sawing machine has poor chip removal. If the sawdust is not easily discharged from the equipment, it will cause the local temperature to be too high, and it is easy to burn the chips, so the sawdust will

The machine must be selected.

4. There are too many impurities in the material or the quality is too poor. For example, if the planing is particleboard, and the particleboard is too rough and has too many impurities,

If the resistance is too large, it will also burn the film.